What You Need to Know About Electricity
For a motor to work, you first need a complete circuit:
- A battery, wires, and a device (like a light bulb) form a basic circuit
- Electricity flows from one battery terminal through the wire to the device and back
- A break in the wire stops the electricity, that's why switches work
- Electricity flows in one direction (conventional flow); flipping the battery reverses the current direction
If you want a deeper understanding of fundamental circuit principles, see our guide on Understanding Circuits: Key Concepts and Theories.
Permanent Magnets: Always On
Permanent magnets have two poles, north and south:
- Opposite poles attract
- Same poles repel
Key point: You can't turn off a permanent magnet. The magnetic domains inside are all lined up in the same direction.
For a more detailed exploration of how permanent magnets create forces and fields, refer to Understanding Magnetism: Forces, Currents, and Magnetic Fields.
Spinning a Magnet
If you put a magnet on a spin-able axis and bring another magnet near it:
- The spinning magnet aligns so opposite poles face each other
- Switch the outside magnet's polarity → the spinning magnet flips to realign
- Keep switching → the magnet keeps spinning
This is the fundamental idea behind an electric motor.
Electromagnets: Magnets You Can Turn On and Off
An electromagnet is made by wrapping wire around a metal bolt and connecting it to a battery:
- Electric current forces the magnetic domains in the bolt to line up
- The bolt becomes a magnet with north and south poles
- It can attract metal and interact with other magnets
- Advantage: You can turn it on and off (disconnect the battery)
- Reversing polarity: Flip the battery or swap the wires, north becomes south and vice versa
⚠️ Warning: Electromagnets get hot if left on for a while. Be careful with science projects.
For a comprehensive understanding of electromagnetic induction and how current creates magnetism, check out the Comprehensive Guide to Electromagnetic Induction and Inductance Principles.
Putting It Together: The DC Motor
Simple Version
Replace the spinning magnet with an electromagnet on an axle. Use permanent magnets on the sides:
- Connect power → electromagnet turns on and aligns with side magnets
- Swap the wires → electromagnet reverses polarity
- Same poles repel, opposite poles attract → the electromagnet spins
- Keep reversing polarity → it keeps spinning
Real Motor Design
Armature, a metal loop that replaces the wrapped bolt. It acts as the spinning electromagnet.
Stator, the two curved permanent magnets on the sides that don't move.
Commutator, a split ring that solves the problem of manually switching wires:
- The ring spins with the armature
- Two brushes (spring-loaded contacts) press against the commutator
- As the commutator rotates, the brushes switch contact to different segments
- This automatically reverses the current direction in the armature loop
- Result: the electromagnet's polarity keeps switching, and the armature keeps spinning
Why Multiple Loops?
With just one loop, the motor can get stuck when brushes are between commutator segments. Adding more loops:
- Each loop takes turns being an electromagnet
- The brushes switch contact to the next pair of segments at the right moment
- This creates smooth, continuous rotation
Torque: What Makes It Spin Faster
Torque is the spinning force on the armature. You can increase it by:
- More wire wraps, each armature loop made of many wires creates a stronger electromagnet
- More electricity, higher current strengthens the magnetic field
Real electric motors have lots of wire wrapped around for exactly this reason.
For a detailed breakdown of how to calculate and optimize torque output, read our Calculating Motor Efficiency: A Step-by-Step Guide.
How Motors Power Everyday Devices
Once you have a spinning axle (the rotor), you can use it to drive:
- Kids' toys, direct rotation
- Fans, spinning blades, or converted to side-to-side oscillation
- Electric cutting knives, spinning motor turns a gear that pushes blades back and forth
This video covers DC motors (battery-powered, common in portable devices). For a broader perspective on all types of motors and their magnetic principles, see the Comprehensive Guide to Magnetism: Magnetic Fields, Forces, and Applications. Other motor types work differently, but all produce spinning motion.
- [Jared] If you look around your house, you will see many devices that have electric motors, such as kids' toys, table fans,
toothbrushes, hairdryers, and this electric cutting knife. But how does the electric motor work? You turn it on and somehow it starts rotating.
Why is that? In this video, we'll cover the basics of electricity and magnets and then put it all together
to understand how the motor works. (buzzing) Let's start with something called a circuit.
You have a battery, some wires and a device that uses electricity, such as a light bulb.
Electricity flows through the circuit. But as soon as there is a break in the wire, the electricity stops flowing
and the light bulb goes off. The path must be complete for the circuit to work. This is best done through the use of a switch.
Electricity is flowing down the wire. This is called conventional flow. If we take the battery out and flip it,
then the current will flow the other way. The light bulb will still work in either case but there are some devices
that will work differently depending on which way the current flows. Okay, so that's the basics of a circuit.
Now let's come over here. This is a magnet. It has a north pole and a south pole.
And it likes to attract other metal objects like these paperclips. If you bring another magnet towards it,
opposite poles attract, and the same poles repel. The magnets don't have to be in this shape,
for example, some magnets might be more flat, like this. You can think of this magnet as always on, it's always working, you can't really turn it off.
That's why it's sometimes called a permanent magnet. It's made up of any smaller magnet domains that are lined up in the same direction
but later, I'll show you a type of magnet where this not always the case. Let's take one of our permanent magnets
and drill a hole in the center and put it on something that will allow it to spin. Now, bring another magnet towards it.
Our spinning magnet will immediately line up until opposite poles are right next to each other. Now switch out the side magnet.
The same poles repel and opposite poles attract. If we keep switching out these side magnets, then our spinning magnet will just keep spinning.
This concept of the spinning magnet is really important. We'll come back to it in a moment. Here's a metal bolt which is not a magnet.
It's made up of magnetic domains but they're pointing in random directions. Now let's take a wire,
wrap it around several times and then create a circuit. The current through wires forces the magnetic domains to line up.
That means we've just made a magnet, or more specifically, an electromagnet. It can do the same things that a permanent magnet can.
It can pick up pieces of metal and it has a north and a south pole, which will attract or repel other magnets.
But the electromagnet is special in the sense that it can be turned on or off, just like the light bulb.
You can't do that with a permanent magnet. Now watch what happens when we flip the battery. The electric current was flowing this way
but now it flows the other way. This will cause the poles on our magnet to switch places. North will become south
and south will become north. This is called reversing the polarity of an electromagnet. Instead of flipping the battery,
an easier way to do this is to just switch the wires. You should be aware that the electromagnet
will get very hot if it's on for a while, just a caution in case this video inspires any science projects.
Let's come back to our spinning magnet. This time we'll replace the spinning magnet with our electromagnet.
As soon as we connect the wires, the magnet turns on and it lines up with the side magnet.
Now, in reality, connecting these wires would prevent the bolt from spinning freely but what's important here
is the concept of the spinning electromagnet. Now let's switch the wires to reverse the poles on the electromagnet.
The same poles repel and opposite poles attract. Now, reverse the polarity again. Same poles repel and opposite poles attract.
If we keep switching the polarity, our electromagnet will just keep spinning. To make this strong,
let's bring in another permanent magnet on the side. Notice how this side has the south pole towards the center and this side
has the north pole towards the center. The side magnets work together to spin the one in the middle.
This right here shows the very basics of an electric motor but we need to make a few improvements.
The two side magnets can be replaced with stronger curved magnets. And instead of a bolt with wires,
we're gonna use a metal loop. This is called the armature. Connect our wires and we have a circuit again.
This time, you can think of the electromagnet as flat like this with the south pole pointing up. Now the armature will spin
until opposite poles are lined up. We can keep it spinning by switching the wires just like we did before.
But this is a lot of work to sit here and manually switch these wires. We need to add something
to the armature called a commutator. It's a ring with gaps in the opposite sides. The commutator will spin along with the armature.
Now we connect the circuit with two brushes on the side. These brushes will slide along as the commutator spins.
And they are spring loaded so that they always maintain contact. The current flows from the wire
through the brush, the commutator ring, the armature loop and back through the other side. Now we have our electromagnet and the armature spins.
As we come around this time, the brushes will switch contact to the other side of the commutator ring.
And remember, there's two brushes so this is happening on both sides. Before the switch,
the current in the armature is flowing this way. After the brushes switch sides, current will flow the other way.
This means the electromagnet switches polarity, which will cause the armature to keep spinning. This commutator ring does the same thing
as switching the wires like we were doing before but this time, it does it all on its own. It will continue to spin
as long as we're connected to a battery. Disconnect the battery, no more electromagnet and the spinning stops.
Now, so far, we've only used one loop on the armature. This will cause our motor to have an irregular speed and in fact, we could get stuck in this position
with the brushes halfway between commutator segments. What we can do is split the commutator ring and then add another loop,
so first, the brushes are in contact with these commutator segments, which turns on this electromagnet,
which causes it to start spinning. Once we get to here, the brushes switch contact
to the next pair of commutator segments, which means this loop turns off and the next loop turns on.
Now, this electromagnet wants to spin. The brushes switch contact and the next loop turns on.
This keeps happening as our motor spins. It's almost like the loops will take turns being an electromagnet.
Some electric motors will add many loops to the armature. This ensures that there will be a continuous spinning motion on the motor.
This spinning force on the armature is called a torque. Stronger torque means a faster spin. There are some things we can do to improve the torque
of the motor. Electromagnets are stronger when there are more wires. This is true when we wrap more wires
around the metal bolt and it's also true when each of our armature loops are made of many wires.
The motor will have stronger electromagnets, which means it will spin faster. If you look at some pictures
of real electric motors, you can see lots of wires wrapped around and yes, this is the same reason.
More wires wrapped around means stronger electromagnets. Another way to make this stronger is to use more electricity.
Let's learn a few more terms here. The part that doesn't move is called the stator. In this case, it's the two permanent magnets on the side.
These fit inside the edges of the motor case. The armature in the middle is also called a rotor. Remember, this is the part that spins.
The axle goes through the middle here and then sticks out the back of the motor. What I've shown you in this video
is called a DC motor. If you have a device that moves and is powered by a battery,
there's a good chance there's DC motor in it. Other types of electric motors will work a little differently than what I've shown here.
No matter the type of motor, most of them will produce some type of spinning motion.
Once it's spinning, we can use this to make different devices move. In this case, a kids' toy.
Or even a fan that cools your room. The spinning of the motor can be converted to other types of movement,
such as the side-to-side motion that we see in this fan. Or how about this electric cutting knife? Each blade is going back and force.
It all starts with the spinning of the motor to turn a gear, which then pushes these two pieces back and forth.
A DC motor works by using an electromagnet on a spinning axle and switching its polarity at the right moment. When you bring a permanent magnet near the electromagnet, they align, but by reversing the electromagnet's polarity, the same poles repel and cause it to spin. Continuous polarity reversal keeps the electromagnet spinning, creating rotary motion.
An electromagnet is used because, unlike a permanent magnet, it can be turned on and off and have its polarity reversed easily. By connecting or disconnecting the battery, you control the magnet's strength and direction. This allows precise, automated switching of the north and south poles to drive continuous rotation.
The commutator is a split ring that spins with the armature (the spinning electromagnet). Two spring-loaded brushes press against it, constantly swapping which segment the current flows through. As the commutator rotates, the brushes automatically reverse the current direction in the armature loop, eliminating the need to manually swap wires and keeping the motor spinning smoothly.
With a single loop, the motor can stall when the brushes sit between commutator segments, cutting current temporarily. Multiple loops ensure that at least one loop is always conducting current, creating a continuous electromagnet. This prevents stalls and provides smooth, uninterrupted rotation, even at low speeds.
Torque is the spinning force that turns the armature. You can increase torque by wrapping more wire coils around the armature, which strengthens the electromagnet, or by increasing the electrical current, which amplifies the magnetic field. In practical motors, many wire coils and higher current are used to deliver strong torque for applications like power tools.
Yes! A DC motor's spinning axle can be directly connected to fans, toys, or even cutting tools via gears or linkages. For example, an electric knife uses a motor that spins a gear to push blades back and forth, while a toy car uses the motor's rotation to drive wheels. This versatility makes DC motors ideal for battery-powered portable devices.
Electromagnets generate heat due to electrical resistance in the wire coils when current flows continuously. In DC motors, the armature and stator coils heat up because they're constantly energized to create magnetic fields. While this is normal, excessive heat can damage the motor, so they are designed with cooling features (fins, fans) or limited duty cycles in science projects.
Keep this summary
Save it to LunaNotes and it becomes a real note in your library — editable, searchable, and ready to turn into flashcards or a diagram. Free to start.
Save to LunaNotesOr summarise for another video.
32K+ people have turned 65K+ videos into notes
“Very useful tool. I'm using it for the last couple weeks and I'm loving it so far. Makes learning on YouTube a great experience.”
This summary and transcript were automatically generated using AI with the Free YouTube transcript summary tool by LunaNotes.
Related summaries
Understanding Magnetism: Forces, Currents, and Magnetic Fields
Discover the principles of magnetism, how currents create magnetic fields, and the forces involved, explained in simple terms.
Engineering Circuit Analysis: Voltage, Current, and Resistance Basics
This foundational lesson explains what an electric circuit is, then dives deep into the core concepts of voltage, current, and resistance using clear analogies like straws and airflow. It also introduces key distinctions between DC and AC, open circuits, short circuits, and the conventional current direction used in engineering.
Comprehensive Guide to Magnetism: Magnetic Fields, Forces, and Applications
Explore the fundamentals of magnetism, including magnetic fields created by bar magnets and current-carrying wires, magnetic forces on charges and loops, and practical calculations like forces between wires and torque on coils. Understand key principles and equations with detailed examples and problem-solving techniques.
Comprehensive Guide to Electromagnetic Induction and Inductance Principles
Explore the fundamental concepts of electromagnetic induction, Faraday's and Lenz's laws, motional EMF, self and mutual inductance, and practical applications including eddy currents and AC generators. Understand key experiments and mathematical formulations that explain how changing magnetic fields induce electric currents.
Understanding Circuits: Key Concepts and Theories
Explore the fundamentals of electrical circuits, current flow, and more with this in-depth guide.
Most viewed summaries
A Comprehensive Guide to Using Stable Diffusion Forge UI
Explore the Stable Diffusion Forge UI, customizable settings, models, and more to enhance your image generation experience.
Kolonyalismo at Imperyalismo: Ang Kasaysayan ng Pagsakop sa Pilipinas
Tuklasin ang kasaysayan ng kolonyalismo at imperyalismo sa Pilipinas sa pamamagitan ni Ferdinand Magellan.
Mastering Inpainting with Stable Diffusion: Fix Mistakes and Enhance Your Images
Learn to fix mistakes and enhance images with Stable Diffusion's inpainting features effectively.
Pamamaraan at Patakarang Kolonyal ng mga Espanyol sa Pilipinas
Tuklasin ang mga pamamaraan at patakaran ng mga Espanyol sa Pilipinas, at ang epekto nito sa mga Pilipino.
How to Install and Configure Forge: A New Stable Diffusion Web UI
Learn to install and configure the new Forge web UI for Stable Diffusion, with tips on models and settings.
Found this summary useful?
Take it with you. One click puts it in your own LunaNotes library.
Save to LunaNotes